Step 1: Select the switch you wish to edit.
Step 2: Under the motion sensor options, you can enable motion sensor and ambient light sensor.
Step 3: Tap, “Room Motion Sensor” in the room to edit motion sensor options for all switches in chosen room.
Step 4: Select “Daytime” and “Nighttime” to edit the start time and to enable motion sensor response schedule. If you disable the motion sensor for either of these time periods, your lights will not turn on if motion is detected during that time period.
Motion Sensor: Enabling the motion sensor will trigger your lights to turn on based on movement in the room. Once you turn off your switch, there is a 30 second buffer time before the motion sensor will activate to give you time to exit the room.
Ambient Light Sensor: When enabled, the ambient light sensor will detect how much light is already in the room to ensure your lights only turn on when you need them to.