Your C-Start switch must be installed prior to connecting it to your smart phone.
Step 1: Download and open the C by GE App.
Step 2: On the home screen, tap the plus(+) icon on the top right-hand corner and select, “Add New Devices”
Step 3: Select, “C-Start Switches”
Step 4: Read the three steps presented carefully, then tap, “Get Started”
Step 5: Your switch should display a blinking blue light ring to indicate it is in the setup mode, then tap “Continue”
Step 6: Select the switch you would like to set up now. Selecting a switch will make its light ring blink green for 15 seconds to help identify which one you are connected to.
Step 7: Select your Wi-Fi network and input the required password. Leave the password field blank for an unsecured network.
Step 8: Select the room that this switch is installed in, or create custom room.
Step 9: Name your switch. Be sure to distinguish between multiple switches within the same room.
Step 10: Select the type of bulbs on this switch. This step will determine if the switch operates as a dimmer or on/off only. You can change this later in device settings.
Step 11: Your switch is now ready. If you have a Google Assistant or Amazon Alexa device, you can activate the device to use your voice to control the switch. For more information about voice assistance, click in the link below.